Modules
In stock
HUB-VM102
The HUB-VM102 records and analyzes vibration, structure-borne sound, and acoustic signals from machines and equipment. This allows for the early detection of anomalies that may indicate wear or potential failures.
The system enables the acquisition and analysis of vibration, structure-borne sound, and acoustic signals at a sampling rate of up to 48 kHz. Two IEPE sensor inputs and two digital inputs allow for targeted monitoring of machines and units either independently via Modbus or in conjunction with an in.hub gateway.
Application Examples
- Vibration, Acoustic, and Structure-Borne Noise Measurement
- Condition monitoring of motors, gearboxes, pumps, and bearings
- Monitoring of generators, turbines, fans, and compressors
- Wear detection and predictive maintenance
- Quality assurance through analysis of vibration signals
- Event-driven measurement via trigger signals
Features
- Two IEPE inputs for vibration and acoustic sensors
- 24-bit resolution and up to 48 kHz sampling rate
- Two digital inputs for trigger signals and speed detection
- Signal processing directly in the module using FFT
- Evaluation of RMS values, peak values, and frequencies
- Configurable low-pass, band-pass, and high-pass filters
- Storage and processing of measured values
- Standalone operation with Modbus connectivity
- Power supply and data communication with the HUB-GM200 or HUB-GM400 via the backplane bus
- Processor
- Arm® Cortex-M4 @ 216 MHz, 32-bit
- Storage
- RAM: 358 kB + 128 MB fast RAM / external RAM 16 MB; Flash: 1 MB
- Power Supply
- 24 V ± 10%
- Interfaces
- 2 digital inputs for trigger and speed, Ethernet 1 x 100 Mbit/s, 2 x IEPE for vibration and acoustic sensors Frequency range: 0.5 ... 10 kHz; synchronous data acquisition on both measurement channels
- HMI
- Status LEDs, internal web server via siineos
- Temperature Range
- Storage: -40 °C to 85 °C; Operation: 0 °C to 50 °C
- Dimensions
- 132 mm x 110 mm x 25 mm
- Protection Class
- IP20
- Availability
- in series
- PDF Download
-
PDF
Download
Technical Data Sheet HUB-VM102 , PDF, Data sheet, EN, 1.0 , Opens in a new tab
Data sheet · EN · 1.0
-
PDF
Download
Programming Manual HUB-VM102 , PDF, Manual, EN, 1.3 , Opens in a new tab
Manual · EN · 1.3
Solutions
Suitable Solutions
No solution matches this selection right now.
Condition Monitoring
in.hub provides devices, the siineos® platform, and apps for collecting machine data directly on-site. This page shows you how to monitor motors and other equipment to keep availability as high as possible.
Personal Introduction
Tell us about your use case.
During our first conversation, we’ll clarify your goals, existing data, and a sensible starting point. You’ll receive an honest assessment of whether and how in.hub fits your project.
Newsletter
The in.hub in.sights&tech.radar
Industry news and real-world insights from actual companies, every two to four weeks.